Chop Saw Reviews – Best Chop Saw Comprehensive Guide


What is a Chop Saw?

A chop saw is a relatively straightforward piece of shop equipment designed to make short work cutting through masonry products, steel, and iron. While a chop saw looks like a miter saw or radial arm saw, it differs greatly by what it uses to make cuts. Unlike other saws that use sawblade with sharp teeth, a chop saw uses an abrasion wheel that cuts on two surfaces: the leading edge of the wheel as well as the sides. However, while some chop saws do include carbide-tipped sawblades, most professionals choose them for their abrasion wheels

Chop saws typically come with large abrasion wheels designed to quickly and cleanly get through sizeable pieces of masonry, steel tubing, and angle iron in a single, smooth pass with as little effort and vibration as possible. They also include powerful motors especially equipped to get through metals that are considerably denser and harder than wood products.

When you regularly need to cut through a wide range of masonry, steel, and iron products there are few more useful tools for your shop or on the jobsite than a reliable, powerful chop saw.

DEWALT D28715 14-Inch Quick-Change Chop Saw

DEWALT-D28715-14-Inch-Quick-Change-Chop-SawWhen you need a real workhorse of a chop saw in your shop or to bring to jobsites, the DeWALT D28715 12-inch Quick-Change Chop Saw is hard to beat and should easily make your shortlist of top products under consideration.

It offers a powerful 15-amp motor at 5.5 horsepower delivering a no-load operation at 4,000 rpm. Those are hard numbers to beat when you need the power to reliable get through steel tubing up to 5-inches across in a single pass.

Additional features include a Quick-Change wheel system allowing for abrasion wheels to be changed without a wrench, Quick-Fence adjustable fence system gets the products from 0-45 degrees quickly and without a wrench, and a Quick-Lock vise designed to securely hold a wide ranges of material sizes to the fence.

  • Powerful 15-amp 5.5 horsepower no-load motor at 4,000 rpm
  • 14-inch all-purpose abrasion wheel
  • Quick-Change no-wrench wheel system
  • 0-45 degree Quick-Fence system
  • 90-day satisfaction guarantee; 3-year limited warranty

Want to get your hands on this super saw? Check out the prices on Amazon.


PORTER-CABLE-PC14CTSD-14-Inch-Chop-SaFor a powerful, no-frills chop saw at a no-frills price, it’s nearly impossible to beat the Porter-Cable PC14CTSD 14-inch Chop Saw for raw power and useful features.

The powerful 15-amp motor delivers awesome no-load operation at 3,800 rpm, providing the confidence you need to cut through the toughest pieces of steel. The quick-release clamp holds every piece of material securely against the fence, and allows for quick removal when the cuts have been made.

When you need to chop a precise miter angles, the Porter-Cable PC14CTSD offers an easy fence system with precise 0-45 degree angles for all your miter needs. The ball-bearing motor design offers smooth turning of the 14-inch abrasion wheel and serves to extend the life and increase the durability of the saw.

  • Powerful 15-amp 3,800 rpm no-load motor
  • Precise 0-45-degree miter cuts
  • Quick-release material clamp for safety and security
  • Smooth up-and-down saw-head operation
  • 3-year limited warranty for purchasing confidence

Want to get your hands on this super saw? Check out the prices on Amazon.

Makita LC1230 12-Inch Metal Cutting Saw

Makita-LC1230-12-Inch-Metal-Cutting-SawThe versatile Makita LC1230 12-inch Metal Cutting Saw is one of the industry’s top rated chop saws. It’s powerful 15-amp motor delivers a no-load operation at 1,300 rpm for increased performance and results. Its quick-release guide plate easily adjusts—without tools—for precise miter cuts 0-45 degrees. This saw easily gets through 4.5-inch materials at 90-degree and 3.5-inch materials at 45-degrees. That’s impressive performance from a 12-inch chop saw.

The quick-release vice ensures material is held securely in place and is perfect when you need to make a series of quick, repetitive cuts. The Makita LC1230 includes a socket wrench for quickly changing the carbide-tipped blade—which lasts longer than abrasion wheels—and stores securely away in the base when not in use.

Safety is always a priority at home, in the woodworking shop, or on the jobsite. The Makita LC1230 includes a lock-off button to prevent the saw from accidentally starting, ensuring every safety requirement for your job is met.

  • 15-amp 1,300 rpm no-load motor
  • D-shape handle ensures secure grip
  • Safety lock-off to prevent accidental starts
  • Carbide-tipped blade for extended life
  • Easy, accurate miter cuts 0-45 degrees

Want to get your hands on this super saw? Check out the prices on Amazon.

MK Morse CSM14MB 14-Inch Dry-Cut Metal Cutting Saw

MK-Morse-CSM14MB-14-Inch-Dry-Cut-Metal-Cutting-SawIf you prefer a chop saw that cuts through metal with a carbide-tipped sawblade rather than grinding through various materials with an abrasion wheel, the MK Morse CSM14MB 14-inch Dry Cut Metal Cutting saw should be considered one of your top choices.

The 72-tooth carbide-tipped sawblade makes quick work of steel pipes, angle iron, tubing, metal studs, and similar making it a truly versatile chop saw, perfect for home, shop, or jobsite. The powerful 15-amp motor delivers 1,300 high-torque rpm cutting for increased effectiveness and precise cuts.

The MK Morse CSM14MB cuts through 5-1/8-inch round material at 90-degrees and 4.-1/8-inch at 45-degrees. It also makes quick work of 4-1/2-inch square material at 90-degrees and 3-1/2-inches at 45-degrees. This is an exceptionally versatile chop saw and is backed by the manufacturer’s 1-year warranty. At just 13 pounds is easy to get in and out of your vehicle or to move from room to room.

  • Powerful low-speed high-torque 15-amp motor at 1,300 rpm
  • 14-inch 72-tooth carbide-tipped sawblade for extended use
  • Included blade-change wrench for quick changes
  • Lightweight design at just 13 pounds
  • Manufacturer’s 1-year warranty

Want to get your hands on this super saw? Check out the prices on Amazon.

Bosch 3814 14-Inch Abrasive Cut-Off Machine

Bosch-3814-14-Inch-Abrasive-Cut-Off-MachineFor an inexpensive, entry-level chop saw with features you’d find on more expensive units, it’s hard to take a pass on the Bosch 3814 14-inch Abrasive Cut-Off Machine for all your chop saw needs.

The strong, durable 15-amp motor delivers a no-load cutting experience at 3,900 rpm, quickly getting through even the toughest materials. In fact, the motor comes standard with extra overload protection to protect against failure during the most demanding cuts.

It also includes a useful locking clamp specially designed to hold both standard and custom materials securely in place against the fence, even when making 0-45-degree miter cuts. For cuts that take longer than normal, the power-on switch locks into place reducing the risk of dangerous hand cramps.

The ball-bearing design ensures smooth, long-lasting operation and delivers quick, smooth cuts every time. The spindle lock makes it a breeze to change the abrasion wheel, making the Bosch 3814 one of the most useful tools in your arsenal. The price makes it almost impossible to resist!

  • Powerful 15-amp 3,900 rpm no-load motor
  • Overload protection when making difficult cuts
  • Spindle lock for easy wheel change
  • Miter cuts 0-45 degrees
  • Ball-bearing design for long, smooth operation
  • 14-inch 36-grit aluminum oxide wheel included

Want to get your hands on this super saw? Check out the prices on Amazon.

Black & Decker BDEBCS14 Chop Saw, 14-Inch

Black-&-Decker-BDEBCS14-Chop-Saw,-14-InchWhen you’re looking for a chop saw designed to do what chop saws do best, the basic Black & Decker BDEBCS14 14-inch Chop Saw will do the job.

The powerful and reliable 15-amp motor will easily get the included 14-inch abrasion wheel through steel, iron, masonry, conduit, and other tubing you would typically cut with a chop saw. It includes a spark deflector and retracting guard for the safest use possible, and the vice ensures materials will stay put while being cut.

The fence easily adjusts for 0-45-degree miter cuts, a feature no chop saw should be without. When the workday is done and it’s time to pack up shop, the locking pin allows for safe pickup and carrying of the 38-pound saw.

  • Long-life 15-amp no-load motor
  • Spark deflector for safe cutting
  • Retracting guard for added safety while in-use
  • Easy to use vice to keep materials securely in place
  • 14-inch blade for thick cuts
  • 2-year manufacturer’s warranty

Want to get your hands on this super saw? Check out the prices on Amazon.

Evolution Power Tools EVOSAW380 14-Inch Steel Cutting Chop Saw

Evolution-Power-Tools-EVOSAW380-14-Inch-Steel-Cutting-Chop-SawIf you’re trying to find a cool operator, then look no further than the Evolution Power Tools EVOSAW380 14-inch Steel Cutting Chop Saw. It’s been specially engineered to provide dry metal cutting without producing unnecessary heat, creating burrs, or needing any coolant to remain at a safe temperature.

The 15-amp motor provides no-load operation at 1,450 rpm but will spin the 66-tooth carbide-tipped blade at 2,200 rpm for quicker work through tough materials. The long-life blade can deliver up to 1,000 cuts through 2-inch x 2-inch steel, ensuring you won’t spend a lot of money replacing worthless sawblades.

Evolution Power Tools backs up this incredible chop saw, the EVOSAW380, with a limited 7-year warranty, which is one of the longest manufacturer guarantees in the industry. When long life and the ability to cut through even the toughest materials, it’s very hard to say no to this chop saw.

  • Dry metal cutting without excess heat
  • 15-amp no-load motor at 1,450 rpm
  • 1,000 cuts through 2-inch by 2-inch steel
  • 14-inch 66-tooth carbide-tipped saw included
  • Manufacturer’s 7-year limited warranty

Want to get your hands on this super saw? Check out the prices on Amazon.

How to Choose the Proper Chop Saw

When considering a chop saw, it’s important to know how it will be used. These are extremely versatile shop tools, and can be used with a wide variety of carbide-tipped sawblade for cutting through steel and iron, and abrasion wheels designed to grind through materials.

Chop saws can safely be used with range of masonry products, tubular steel, angle iron, conduit, and other similar metal products. Slower rpm saws offer cleaner but slower cuts through extremely tough materials, while higher rpm chop saws are great for softer tubing and the like.

Choose a chop saw for the most common cuts and materials you face on a daily basis and you’ll make the right choice.

Leave a Reply

Your email address will not be published. Required fields are marked *